PRODUCTION OF THREE – DIMENSIONAL OBJECTS ON THE INSTALLATION «3D PRINTING+ELECTROSPINNING»

Authors

  • Zh. E. Ydyryssova Institute of Combustion Problems Republic of Kazakhstan, 050012, Almaty 172, Bogenbai batyr str.
  • Ch.B. Daulbaev Institute of Combustion Problems Republic of Kazakhstan, 050012, Almaty 172, Bogenbai batyr str.
  • Ph. R. Sultanov Institute of Combustion Problems Republic of Kazakhstan, 050012, Almaty 172, Bogenbai batyr str.
  • Z.A. Mansurov Institute of Combustion Problems Republic of Kazakhstan, 050012, Almaty 172, Bogenbai batyr str.
  • E.T. Aliev Institute of Combustion Problems Republic of Kazakhstan, 050012, Almaty 172, Bogenbai batyr str.

Keywords:

3D printer, electroformation, nano-sized fibers, nano objects

Abstract

This work shows the possibility of producing three-dimensional nanosized polymer fibres. The obtained fibres are oriented, this allowing to create three-dimensional objects. The proposed method allows to lay strictly oriented nanofibers from PMMA-polymer with the diameter from 50 to 500 nm. Application of different types of electrodes make it possible to vary the size of nanofibers. Oriented polymer nanofibers were used for construction of bio-frames for biological cells.

References

(1) Minhee Lee and Ho-Young Kim, Toward Nanoscale Three-Dimensional Printing: Nanowalls Built of Electrospun Nanofibers, Department of Mechanical and Aerospace Engineering, Seoul National University, Seoul 151-744, Korea, 2015

(2) Luo, C. J.; Stoyanov, S. D.; Stride, E.; Pelan, E.; Edirisinghe, M.Electrospinning versus fibre production methods: from specifics totechnological convergence. Chem. Soc. Rev. 2012, 41, 4708−4735. https://doi.org/10.1039/c2cs35083a

(3) Huang, Z.-M.; Zhang, Y.-Z.; Kotaki, M.; Ramakrishna, S., A Review on polymer nanofibers by electrospinning and their applications in nanocomposites // Composites Science and Technology. – 2003, 63, P. 2223-2253. https://doi.org/10.1016/S0266-3538(03)00178-7

(4) Frenot, A., and Chronakis, I.S. Polymer nanofibers assembled by electrospinning // Current Opinionin Colloid. – 2003. 8, 64, P. 1259-1309. https://doi.org/10.1016/S1359-0294(03)00004-9

(5) Theron A, Zussman E, Yarin AL. Electrostatic field-assisted alignment of electrospun nanofibers // Nanotechnology. – 2001. – 12 (3). – P. 384–390. https://doi.org/10.1088/0957-4484/12/3/329

(6) Koski A, Yim K, Shivkumar S. Effect of molecular weight on fibrous PVA produced by electrospinning // Materials Letter. – 2004. – Vol. 58. P. 493–507. https://doi.org/10.1016/S0167-577X(03)00532-9

(7) Subbiah, T.; Bhat, G.S.; Tock, R.W.; Parameswaran, S.; Ramkumar, S.S. Electrospinning of Nanofibers // Journal of Applied Polymer Science. – 2005. – Vol. 96. – P. 557-569. https://doi.org/10.1002/app.21481

(8) А.Т. Матвеев, И.М. Афанасов Получение нановолокон методом электроформования. Учебное пособие для студентов по специальности «Композиционные наноматериалы», Москва. 2010.

Downloads

Published

2017-04-25

How to Cite

Ydyryssova, Z. E., Daulbaev, C., Sultanov, P. R., Mansurov, Z., & Aliev, E. (2017). PRODUCTION OF THREE – DIMENSIONAL OBJECTS ON THE INSTALLATION «3D PRINTING+ELECTROSPINNING». Combustion and Plasma Chemistry, 15(2), 184–188. Retrieved from https://cpc-journal.kz/index.php/cpcj/article/view/255

Issue

Vol. 15 No. 2 (2017): COMBUSTION AND PLASMA CHEMISTRY

Section

Статьи

License

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Most read articles by the same author(s)

1 2 3 4 > >>