ПЕРСПЕКТИВЫ РАЗВИТИЯ 3D-ПЕЧАТИ
DOI:
https://doi.org/10.18321/cpc333Ключевые слова:
аддитивное производство, энергетические материалы, 3D-печать, 3D-принтер, методы печатиАннотация
В данной статье рассмотрены основные процессы, материалы и их применения современной технологии аддитивного производства. Представлены основные виды материалов и их комбинации, используемые при 3D-печати. Показаны преимущества и недостатки разработанных технологии 3D-печати. Выявлены основные проблемы практического применения 3D-печати для энергетических материалов. Рассмотрены направления развития и совершенствования данной технологии.
Библиографические ссылки
(1). Колмыкова О.Н., Кудрявцева Т.В. Научно-технический прогресс как фактор повышения уровня жизни населения // Социально-экономические явления и процессы, 2011. № 5-6 (027 028). – C.127-129.
(2). Кокцинская Е.М. Технология 3D-печати: обзор последних новостей // Научный журнал «Видеонаука», 2016. – № 2 (2) – С.18-20.
(3). Gunduz I. E., McClain M. S., Cattani P., Chiu G. T. C., Rhoads, J. F., Son S. F., 3D printing of extremely viscous materials using ultrasonic vibrations // Additive manufacturing, 2018. – Vol. 22, – P. 98-103. https://doi.org/.16/j. addma.2018.04.029.
(4). З.А. Мансуров, Е.Т. Алиев, Т.П. Дмитриев, Ч.Б. Даулбаев. Аддитивные технологии (3D Printing): монография. Алматы, Қазақ университеті, 2017, 191 c.
(5). Lori J. Groven and Mark J. Mezger. Energetic materials. Advanced processing technoogies for next-generation materials. Printed energetics. The path toward additive manufacturing of munitions. Chapter 7. 14 Pages.
(6). Nannan Guo, Ming C. Leu Additive manufacturing: technology, applications and research needs. Front. Mech. Eng. 2013, 8(3): 215–243 https://doi.org/10.1007/s11465-013-0248-8
(7). Гришин А.С., Бредихина О.В., Помоз А.С., Пономарев В.Г., Красуля О.Н. Новые технологии в индустрии питания – 3Dпечать // Вестник ЮУрГУ. Серия «Пищевые и биотехнологии». – 2016. – Т. 4, № 2. – С. 36–44.
(8). ASTM. ASTM F2792 − 12a standard terminology for additive manufacturing technologies.
(9). Yuanbin W., Blache R., Xun X. Selection of additive manufacturing processes // Rapid prototyping journal, 2017. – Vol. 23, № 2, – P. 434-447. https://doi.org/10.1108/RPJ-09-2015-0123
(10). Ze-Xian L., Yen T.C., Ray M. R., Mattia D., Metcalfe I.S., Patterson D. A. Perspective on 3D printing of separation membranes and comparison to related unconventionalfabrication techniques // Journal of membrane science, 2016. – Vol 523, № 1, – P. 596-613. https://doi.org/10.1016/j.memsci.2016.10.006
(11). Shahrubudin N., Lee T.C., Ramlan R. An overview on 3D printing technological, materials, printing technology // Procedia manufacturing, 2019. – Vol. 35 – P. 1286–1296. https://doi.org/10.1016/j.promfg.2019.06.089
(12). Syed A. M. T., Elias P. K., Amit B., Susmita B., Lisa O., Charitidis C. Additive manufacturing: scientific and technological challenges, market uptake and opportunities // Materials today, 2017. – Vol. 1, – P. 1-16.
(13). Pinkerton A. J. Laser direct metal deposition: theory and applications in manufacturing and maintenance // Advances in laser materials processing technology, research and application. Woodhead publishing series in welding and other joining technologies, 20, – P. 461-491. https://doi.org/10.1533/9781845699819.6.461
(14). Ugur M.D., Gharehpapagh B., Yaman U., Dolen M. The role of additive manufacturing in the era of Industry 4.0 // Procedia manufacturing, 2017. – Vol. 11, – P. 545-554. https://doi.org/10.1016/j.promfg.2017.07.148
(15). Michael Molitch-Hou. Overview of additive manufacturing process // Additive manufacturing materials, processes, quantifications and applications, 2018, – P. 1-38. https://doi.org/10.1016/B978-0-12-812155-9.00001-3
(16). Denisse Ortiz-Acosta, Tanya Moore. Functional 3D printed polymeric materials // Functional materials. Edited by Dipti Sahu.
(17). Yee L. Y., Yong S.E.T., Heang K.J.T., Zheng K. P., Xue Y. L., Wai Y. Y., Siang C. H. T., Augustinus L. 3D printed bio-models for medical applications // Rapid prototyping journal, 2017. – Vol. 23, № 2, – P. 227-235. https://doi.org/10.1108/RPJ-08-2015-0102
(18). Yee Ling Yapa, Chengcheng Wanga, Swee Leong Singa, Vishwesh Dikshita, Wai Yee Yeonga, JunWeib. Material jetting additive manufacturing: An experimental study using designed metrological benchmarks // Precision Engineering, – Vol. 50, October 2017, – P. 275-285. https://doi.org/10.1016/j.precisioneng.2017.05.015
(19). Tiwari S.K., Pande S., Agrawal S., M. Bobade S. Selection of selective laser sintering materials for different applications // Rapid prototyping journal, 2015.– Vol. 21, № 6, – P. 630-648. https://doi.org/10.1108/RPJ-03-2013-0027
(20). Anna Aimar, Augusto Palermo, Bernardo Innocenti. The role of 3D printing in medical applications: a state of the art // Journal of healthcare engineering, Volume 2019, https://doi.org/10.1155/2019/5340616
(21). Low Z., Chua Y.T., Ray B.M., Mattia D., Metcalfe I.S., Patterson D.A. Perspective on 3D printing of separation membranes and comparison to related unconventional fabrication techniques // Journal of membrane science, 2017.– Vol. 523, № .1, – P. 596-613. https://doi.org/10.1016/j.memsci.2016.10.006
(22). Goldy Kata, Nelofar Tyag, Ashish Joshi. Digital light processing and its future applications // International journal of scientific and research publications, Volume 3, Issue 4, April 2013, ISSN 2250-3153.
(23). Ngo T. D., Kashani A., Imbalzano G., Nguyen K. T., Hui D. Additive manufacturing (3D printing): A review of materials, methods, applications and challenges // Composites Part B, 2018. – Vol. 143, – P. 172-196. https://doi.org/10.1016/j.compositesb.2018.02.012
(24). Kaufui V. Wong, Aldo Hernandez. A review of additive manufacturing. Review article // International scholarly research network ISRN Mechanical engineering, Volume 2012, https://doi.org/10.5402/2012/208760
(25). Ligon S. C., Liska R., Stampfl J., Gurr M. Mülhaupt R. Polymers for 3D printing and customized additive manufacturing // Chemical reviews, 2017. – Vol. 117, № 15, – P. 212-290. https://doi.org/10.1021/acs.chemrev.7b00074
(26). Yap Y. L., Dikshit V., Lionar S. P, Yang H., Lim J. C., Qi X., Yeong W. Y., Wei J. Investigation of fiber reinforced composite using multi-material 3D printing // in 27th solid freeform fabrication symposium, Austin, 2016.
(27). Horst D.J., Duvoisin C.A., Viera R.A. Additive manufacturing at industry 4.0: a review // International journal of engineering and technical research, 2018. – Vol. 8, №.8, – P. 1-8.
(28). Nesma T. Aboulkhair, Marco Simonelli, Luke Parry, Ian Ashcroft, Christopher Tuck, Richard Hague. 3D printing of aluminium alloys: additive manufacturing of aluminium alloys using selective laser melting // Progress in materials science, Volume 106, December 2019, https://doi.org/10.1016/j.pmatsci.2019.100578
(29). Trevisan F., Calignano F., Aversa A., Marchese G., Lombardi M., Biamino S., Ugues D., Manfredi D. Additive manufacturing of titanium alloys in the biomedical field: processes, properties and applications // Journals indexing & metrics, 2018. – Vol. 16, № 2. https://doi.org/10.5301/jabfm.5000371
(30). Hitzler L., Alifui-Segbaya F., William P., Heine B., Heitzmann M., Hall W., Merkel M., Ochner A. Additive manufacturing of cobalt based dental alloys: analysis of microstructure and physicomechanical properties // Advances in materials science and engineering, 2018. – Vol. 8, – P. 1-12. https://doi.org/10.1155/2018/8213023
(31). Murr L. E. Frontiers of 3D Printing. Additive manufacturing: from human organs to aircraft fabrication // Journal of materials sciences and technology, 2016. – Vol. 3, № 10, – P. 987-995. https://doi.org/10.1016/j.jmst.2016.08.011
(32). Gu D. D., Meiners W., Wissenbach K., Poprawe R. Laser additive manufacturing of metallic components: materials, processes and mechanisms // International materials reviews, 2012, – Vol. 57, № 3, – P. 133-164. https://doi.org/10.1179/1743280411Y.0000000014
(33). Chacon J.M., Caminero M.A., Nunez P.J., Garcia-Plaza E., Garcia-Moreno I., Reverte J.M. Additive manufacturing of continuous fibre reinforced thermoplastic composites using fused deposition modelling: Effect of process parameters on mechanical properties // Composites science and technology, – Vol. 181, September 2019, https://doi.org/10.1016/j.compscitech.2019.107688
(34). Dizon J.R.C., Jr A.H.E., Chen Q., Advincula R.C. Mechanical characterization of 3d-printed polymers // Additive manufacturing, 2018. – Vol. 20, – P. 44-67. https://doi.org/10.1016/j.addma.2017.12.002
(35). Sunpreet Singh, Seeram Ramakrishna, Filippo Berto. 3D Printing of polymer composites: A short review // Mat Design Process Comm. 2019. https://doi.org/10.1002/mdp2.97
(36). Shaukat Ali, Karl Kolter, Matthias Karl. Evaluation of different polymers in 3D printing technologies // American pharmaceutical review, October 18, 2019.
(37). Zhangwei Chen, Ziyong Li, Junjie Li, Chengbo Liu, Changshi Lao , Yuelong Fu, Changyong Liu, Yang Li, Pei Wang, Yi He. 3D printing of ceramics: A review // Journal of the european ceramic society, 39 (2019). – P. 661–687. https://doi.org/10.1016/j.jeurceramsoc.2018.11.013
(38). Owen D., Hickey J., Cusson A., Ayeni O. I., Rhoades J., Yifan D., Limmin W., Hye-Yeong P., Nishant H., Raikar P.P., Yeon- Gil, Jing Z. 3D printing of ceramic components using a customized 3D ceramic printer // Progress in additive manufacturing, 2018. Vol 1, – P. 1-7. https://doi.org/10.1007/s40964-018-0037-3
(39). Hao W., Liu Y., Zhou H., Chen H., Fang D. Preparation and characterization of 3D printed continuous carbon fiber reinforced thermosetting composite // Polymer Testing, 2018.– Vol. 65, – P. 29–34. https://doi.org/10.1016/j.polymertesting.2017.11.004
(40). Sathishkumar T.P., Satheeshkumar S., Naveen J. Glass fiber-reinforced polymer composites – a review // Journal of reinforced plastics and composites, 2014. – Vol. 33, № 13, – P. 1-14. https://doi.org/10.1177/0731684414530790
(41). Liu Z., Zhang L., Yu E., Ying Z., Zhang Y., Liu X., Eli W. Modification of glass fiber surface and glass fiber reinforced polymer composites challenges and opportunities: from organic chemistry perspective // Current organic chemistry, 2015.– Vol. 19. № .11, – P. 991-1010. https://doi.org/10.2174/138527281911150610100914
(42). Alexander S. Tappan, J. Patrick Ball, James W. Colovos. Inkjet printing of energetic materials: Al/MoO3 and Al/ Bi2O3 thermite // The 38th International pyrotechnics seminar, Denver, CO, June 10–15, 2012.
(43). Chiroli M., Ciszek F., Baschung B. Additive manufacturing of energetic materials // Proceedings of the 29th Annual International Solid Freeform Fabrication Symposium – An additive manufacturing conference. Reviewed paper. – P. 1003-1011.
(44). Allison K. Murray, Tugba Isik, Volkan Ortalan, I. Emre Gunduz, Steven F. Son, George T.-C. Chiu, Jeffrey F. Rhoads. Two-component additive manufacturing of nanothermite structures via reactive inkjet printing // Journal of applied physics, 2017, 122, – P. 184901-1– 184901-5. https://doi.org/10.1063/1.4999800
(45). Trevor J. Fleck, Allison K. Murray, I. Emre Gunduz, Steven F. Son, George T.-C Chiu, Jeffrey F. Rhoads. Additive manufacturing of multifunctional reactive materials // Additive manufacturing 17 (2017) – P.176-182. https://doi.org/10.1016/j.addma.2017.08.008
Загрузки
Опубликован
Как цитировать
Выпуск
Раздел
Лицензия
Это произведение доступно по лицензии Creative Commons «Attribution» («Атрибуция») 4.0 Всемирная.
