Determination of burning rate gas generating composition based on sodium nitrate by the method of reorienting wires

Authors

  • S. Tursynbek Al-Farabi Kazakh National University, ave. Al-Farabi 71, Almaty, Kazakhstan; The Institute of Combustion Problems, Bogenbai Batyr str., 172, Almaty, Kazakhstan
  • D.A. Baiseitov Al-Farabi Kazakh National University, ave. Al-Farabi 71, Almaty, Kazakhstan
  • M.I. Tulepov Al-Farabi Kazakh National University, ave. Al-Farabi 71, Almaty, Kazakhstan; The Institute of Combustion Problems, Bogenbai Batyr str., 172, Almaty, Kazakhstan
  • Yu.V. Kazakov Al-Farabi Kazakh National University, ave. Al-Farabi 71, Almaty, Kazakhstan; The Institute of Combustion Problems, Bogenbai Batyr str., 172, Almaty, Kazakhstan
  • F.Yu. Abdrakova Al-Farabi Kazakh National University, ave. Al-Farabi 71, Almaty, Kazakhstan
  • Z.A. Mansurov Al-Farabi Kazakh National University, ave. Al-Farabi 71, Almaty, Kazakhstan; The Institute of Combustion Problems, Bogenbai Batyr str., 172, Almaty, Kazakhstan

DOI:

https://doi.org/10.18321/cpc306

Keywords:

gas generator, the burning rate, heterogeneous condensed systems, dispersion

Abstract

When working in conditions of dense urban development and the extraction of a piece of stone, the question arises of organizing gentle destruction modes, which requires the use of pyrotechnic compositions operating in deflagration mode. In such compositions, ammonium nitrate, ammonium perchlorate and various nitrates are used as an oxidizing agent. Magnesium is often used as a fuel. In this paper, we studied the combustion of a three-component mixture of sodium nitrate, magnesium, and carbon, obtained by carbonizing the walnut shell, or by grinding the elements of gas masks. Thermodynamic calculations of the combustion of a mixture with different content of components were carried out and the combustion characteristics of the mixture NaNO3/Mg/C(60/20/20) were measured. The prospect of using such a mixture in gas generator cartridges is shown. Presents methods for determining the burning rate, which is easy and affordable, continuous measurement of the current mass or linear burning rate. The results of the experiments are presented after processing with the help of modern programs. As well as the influence of the size of the components and their relationship to the burning rate.

References

(1). Н.А. Силин, Л.Я. Кашпоров, В.Д. Гладун, Л.Е. Шейнман, В.А. Ващенко, Е.С. Шахиджанов. Горение металлизированных гетерогенных конденсированных систем. – М.: Машиностроение, 1982г. – 56 С.

(2). Simones P., Pedroso L., Portugal A. Propellants, Explosives, Pyrotechnics. 2001. №.26. P. 278-283. https://doi.org/10.1002/1521-4087(200112)26:6<278::AID-PREP278>3.0.CO;2-H

(3). Архипов В.А., Попок В.Н., Савельева Л.А. Горение энергетических систем конденсированных систем на основе нитрата аммония // III Всероссийская конференция «Энергетические конденсированные системы»: Материалы конференции. М.: Торус- Пресс, 2006. С. 130-131.

(4). Andrew W.C., Dissertation Master of Engineering. Pretoria. University of Pretoria. 2017.

(5). Корчагин М.А., Ляхов Н.З. Самораспространяющийся высокотемпературный синтез механически активированных смесей // Химическая физика. – 2008. – Т.27, №1. – С.73-78.

(6). Байсейтов Д.А., Корчагин М.А., Зарко В.Е., Суродин Г.С, Тулепов М.И., Кискин А.Б. Влияние добавки диборида алюминия на характеристики горения и зажигания пиротехнического состава на основе нитрата аммония // IX международный симпозиум «Горения и плазмохимия», 15-17 сентября 2017, Алматы, Казахстан. – С. 15-18.

(7). Трусов Б.Г. // Инженерный журнал: наука и инновации. – 2012. – №1(1). – С. 21

Published

2019-05-25

How to Cite

Tursynbek, S., Baiseitov, D., Tulepov, M., Kazakov, Y., Abdrakova, F., & Mansurov, Z. (2019). Determination of burning rate gas generating composition based on sodium nitrate by the method of reorienting wires. Combustion and Plasma Chemistry, 17(2), 106–109. https://doi.org/10.18321/cpc306

Most read articles by the same author(s)

1 2 3 4 5 > >>