Пішінді есте-сақтайтын титан-никельді суперсерпімді қорытпалардың жоғары температуралық синтезі мини-обзор
DOI:
https://doi.org/10.18321/cpc23(3)383-397Кілт сөздер:
титан-никель қорытпасы, пішінді есте сақтау әсері, суперсерпімді қасиеттер, жоғары температуралық синтез, фазалық түрлендіруАңдатпа
Қазіргі уақытта пішінді есте сақтау эффектісі бар кеуекті Ti-Ni негізіндегі қорытпаларды синтездеу технологиясы кеңінен зерттеліп, әртүрлі қолдану салаларында үлкен қызығушылық тудыруда. Осындай материалдар өздерінің бірегей функционалдық қасиеттерінің арқасында медицинада, дәлме-дәл аспап жасау саласында, сондай-ақ аэроғарыш және авиация технологияларында кеңінен қолданылады. Алайда дәстүрлі өндіріс әдістерінің көпшілігі қымбат шикізатты және күрделі, энергияны көп қажет ететін жабдықтарды талап етеді, бұл олардың өндірістік тиімділігін шектейді. Осы мәселелерді шешу мақсатында баламалы технология ретінде жоғары температуралы өздігінен таралатын синтез (ТТС) әдісі ұсынылады. Экзотермиялық реакциялар нәтижесінде ішкі жылу түзілу есебінен жоғары температураға жету мүмкіндігі бұл әдістің энергия тиімділігін арттырады және сыртқы жылу көздеріне деген қажеттілікті азайтады. Нәтижесінде алынған өнім құрылымдық біртектілікке ие болады және жалпы өндіріс шығындары төмендейді. Бұл ғылыми шолу ТТС әдісі арқылы нитинол алу мүмкіндігін, алынған материалдың құрылымдық және функционалдық қасиеттерін, сондай-ақ синтез параметрлерінің материал сапасына әсерін жан-жақты қарастырады.Әдебиеттер тізімі
(1) Y. Guo, A. Klink, C. Fu, et al. Machinability and surface integrity of Nitinol shape memory alloy, Crp. Ann. 62 (2013) 83–86. Crossref
(2) A. Bansiddhi, T.D. Sargeant, S.I. Stupp, et al. Porous NiTi for bone implants: a review, Acta Biomater. 4 (2008) 773–782. Crossref
(3) H. Aihara, J. Zider, G. Fanton, et al. Combustion synthesis porous nitinol for biomedical applications, Int. J. Biomater. 2019 (2019) 4307461. Crossref
(4) G. Tosun, L. Ozler, M. Kaya, et al. A study on microstructure and porosity of NiTi alloy implants produced by SHS, J. Alloys Compd. 487 (2009) 605–611. Crossref
(5) Y.H. Li, L.J. Rong, Y.Y. Li. Pore characteristics of porous NiTi alloy fabricated by combustion synthesis, J. Alloys Compd. 325 (2001) 259–262. Crossref
(6) S. Shabalovskaya, J. Anderegg, J. Van Humbeeck. Critical overview of Nitinol surfaces and their modifications for medical applications, Acta Biomater. 4 (2008) 447–467. Crossref
(7) A. Biswas. Porous NiTi by thermal explosion mode of SHS: processing, mechanism and generation of single phase microstructure, Acta Mater. 53 (2005) 1415–1425. Crossref
(8) K. Ibrahim, E. Safwat, I. Ghayad, et al. In-vitro biocompatibility evaluation of cast Ni-Ti alloy produced by vacuum arc melting technique for biomedical and dental applications, Chem. Pap. 77 (2023) 847–858. Crossref
(9) S.K. Patel, P. Dubey, R. Roshan, et al. Elastic and transformation behaviour of equiatomic NiTi shape memory alloys fabricated at different sintering temperatures, Mater. Today Commun. 37 (2023) 107203. Crossref
(10) Y. Huang, F. Khan, M. Chang, et al. Utility of a nitinol stone extractor for intraocular foreign body removal, Am. J. Ophthalmol. (n.d.).
(11) H.C. Jiang, L.J. Rong. Ways to lower transformation temperatures of porous NiTi shape memory alloy fabricated by self-propagating high-temperature synthesis, Mater. Sci. Eng. A 438 (2006) 883–886. Crossref
(12) J.C. Chung, P.K. Chu. Effects of heat treatment on characteristics of porous Ni-rich NiTi SMA prepared by SHS technique, Trans. Nonferrous Met. Soc. China 16 (2006) 49–53. Crossref
(13) A. Saadati, H. Aghajani. Fabrication of porous NiTi biomedical alloy by SHS method, J. Mater. Sci. Mater. Med. 30 (2019) 92. Crossref
(14) K. Naplocha. Self-propagating high-temperature synthesis (SHS) of intermetallic matrix composites, Intermetallic Matrix Compos. (2018) 203–220. Crossref
(15) P. Bassani, P. Giuliani, A. Tuissi, et al. Thermomechanical properties of porous NiTi alloy produced by SHS, J. Mater. Eng. Perform. 18 (2009) 594–599. Crossref
(16) B.Y. Tay, C.W. Goh, Y.W. Gu, et al. Porous NiTi fabricated by self-propagating high-temperature synthesis of elemental powders, J. Mater. Process. Technol. 202 (2008) 359–364. Crossref
(17) R.R. Kundiya, M. Kadam, P. Jadhav, et al. A review on high speed micro-milling of shape memory alloy (NiTinol): Process and post perspective, Int. J. Interact. Des. Manuf. 19 (2025) 2337–2353. Crossref
(18) H. Yuca, T.Ç. Şenocak, O. Yiğit, et al. Semi-quantitative analysis on sea buckthorn phenolic-rich extract coating bone-like open porous NiTi-based alloy, Heliyon 10 (2024) 345–394. Crossref
(19) M.W. Wu, Z.F. Hu, B.B. Yang, et al. Additive manufacturing of Cu-Al-Mn shape memory alloy with enhanced superelasticity, Rare Met. 42 (2023) 4234–4245. Crossref
(20) R. Roshan, S.K. Patel. NiTi plasma spray coating, Nickel-Titanium Smart Hybrid Mater. (2022) 151–172. Crossref
(21) D. Piorunek, O. Oluwabi, J. Frenzel, et al. Effect of off-stoichiometric compositions on microSHS structures and phase transformation behavior in Ni-Cu-Pd-Ti-Zr-Hf high entropy shape memory alloys, J. Alloys Compd. 857 (2021) 157467. Crossref
(22) S. Dubinskiy, S. Prokoshkin, V. Sheremetyev, et al. The mechanisms of SHSess-induced transformation in ultimately fine-grained titanium nickelide, and critical grain size for this transformation, J. Alloys Compd. 858 (2020) 157733. Crossref
(23) Y. Yang, J.B. Zhan, J.B. Sui, et al. Functionally graded NiTi alloy with exceptional SHSain-hardening effect fabricated by SLM method, Scr. Mater. 188 (2020) 130–134. Crossref
(24) L. Wang, M. Okugawa, H. Konishi, et al. Fusion of Ni plating on CP-titanium by electron beam single-track scanning: Toward a new approach for fabricating TiNi self-healing shape memory coating, Mater. 16 (2023) 5449. Crossref
(25) L.A. Khan, E. McCarthy, C. Muilwijk, et al. Analysis of nitinol actuator response under controlled conductive heating regimes, Results Eng. 18 (2023) 101047. Crossref
(26) D. Nazarov, A. Rudakova, E. Borisov, et al. Surface modification of additively manufactured nitinol by wet chemical etching, Mater. 14 (2021) 7683. Crossref
(27) P. Novák, H. Moravec, P. Salvetr, et al. Preparation of nitinol by non-conventional powder metallurgy techniques, Mater. Sci. Technol. 31 (2015) 1886–1893. Crossref
(28) S. Parvizi, S.M. Hashemi, F. Asgarinia, et al. Effective parameters on the final properties of NiTi-based alloys manufactured by powder metallurgy methods: A review, Prog. Mater. Sci. 117 (2021) 100739. Crossref
(29) M. Mehrpouya, A. Gisario, M. Elahinia. Laser welding of NiTi shape memory alloy: A review, J. Manuf. Process. 32 (2018) 216–232. Crossref
(30) J. Butler, P. Tiernan, A.A. Gandhi, et al. Production of nitinol wire from elemental nickel and titanium powders through spark plasma sintering and extrusion, J. Mater. Eng. Perform. 20 (2011) 757–761. Crossref
(31) S. Gao, F. Weng, O.P. Bodunde, et al. Spatial characteristics of nickel-titanium shape memory alloy fabricated by continuous directed energy deposition, J. Manuf. Process. 71 (2019) 417–428. Crossref
(32) K. McNamara, S. Beloshapkin, K.M. Hossain, et al. Tantalum coating inhibits Ni-migration from titanium out-diffusion in NiTi shape memory biomedical alloy, Appl. Surf. Sci. 520 (2020) 147621. Crossref
(33) V. Parmar, S. Singh, S. Kumar, et al. Thermo-physical modeling and experimental validation of core-shell nanoparticle fabrication of nickel-titanium (nitinol) alloy, Opt. Laser Technol. 138 (2021) 106880. Crossref
(34) P.P. Paul, H.M. Paranjape, B. Amin-Ahmadi, et al. Heterogeneity and inelasticity of deformation in a notched martensitic NiTi shape memory alloy specimen, Acta Mater. 194 (2020) 49–59. Crossref
(35) L.A. Dobrzański, L.B. Dobrzański, A.D. Dobrzańska-Danikiewicz, et al. Nitinol type alloys general characteristics and applications in endodontics, Processes 10 (2022) 101. Crossref
(36) E. Marchenko, G. Baigonakova, A. Shishelova. Influence of the gas reaction atmosphere on the SHS structure, phase composition, functional properties and cytocompatibility of porous titanium-nickel alloys, Metals 12 (2022) 2170. Crossref
(37) A.N. Monogenov, E.S. Marchenko, G.A. Baigonakova, et al. Improved mechanical properties of porous nitinol by aluminum alloying, J. Alloys Compd. 918 (2022) 165617. Crossref
(38) V. Gunther, Yu. Yasenchuk, T. Chekalkin, et al. Formation of pores and amorphous-nanocrystalline phases in porous TiNi alloys made by self-propagating high-temperature synthesis (SHS), Adv. Powder Technol. 30 (2019) 673–680. Crossref
(39) J. Zhan, J. Wu, R. Ma, et al. Effect of microstructure on the superelasticity of high-relative-density Ni-rich NiTi alloys fabricated by laser powder bed fusion, J. Mater. Process. Technol. 317 (2023) 117988. Crossref
(40) J.L. Zhang, J.L. Cann, S.B. Maisel, et al. Design of a V-Ti-Ni alloy with superelastic nano-precipitates, Acta Mater. 196 (2020) 710–722. Crossref
(41) Y. Kopit. The ability of systems based on Ni, Al and Ti to be synthesized by self-propagating high-temperature synthesis (SHS), Intermetallics 9 (2001) 387–393. Crossref
(42) M. Sharma, B.C. Maji, M. Krishnan. A study on the phase transformation behavior of Al substituted Ni-rich and Ti-rich Ni-Ti-Al alloys, Phys. Procedia 10 (2010) 28–32. Crossref
(43) S. Alipour, F. Taromian, E.R. Ghomi, et al. Nitinol: From historical milestones to functional properties and biomedical applications, Proc. Inst. Mech. Eng. Part H: J. Eng. Med. 236 (2022) 1595–1612. Crossref
(44) R. Chaudhari, J.J. Vora, D.M. Parikh. A review on applications of nitinol shape memory alloy, Recent Adv. Mech. InfraSHS Struct.: Proc. ICRAM 2020 (2021) 123–132. Crossref
(45) N. Agarwal, J.R. Murphy, T.S. Hashemi, et al. Effect of heat treatment time and temperature on the microstructure and shape memory properties of nitinol wires, Mater. 16 (2023) 6480. Crossref
(46) A. Kumar, I.A. Palani, M. Yadav. Comprehensive study of microstructure, phase transformations, and mechanical properties of nitinol alloys made of shape memory and superelastic wires and a novel approach to manufacture Belleville spring using wire arc additive manufacturing, Mater. Today Commun. 38 (2024) 107881. Crossref
(47) M. Sureshkumar, S.M. Mohan. Review on manufacturing and development of Ni-Ti shape memory alloys, Springer Proc. Mater. 2019 (2021) 859–865. Crossref
(48) V. Komarov, R. Karelin, V. Cherkasov, et al. Effect of severe torsion deformation on structure and properties of titanium-nickel shape memory alloy, Metals 13 (2023) 1099. Crossref
(49) D. Maashaa, E. Purevdagva, V.V. Rubanik, et al. The influence of ultrasonic activation on microstructure, phase transformation and mechanical properties of porous Ni-Ti shape memory alloys via self-propagating high-temperature synthesis, Mater. 16 (2023) 6134. Crossref
(50) N. Resnina, V. Rubanik Jr., V. Rubanik, et al. Influence of pre-heating temperature and ultrasonic vibration treatment on the structure and martensitic transformations in NiTi foams produced by SHS, Lett. Mater. 12 (2022) 164–168. Crossref
Жүктеулер
Жарияланды
Журналдың саны
Бөлім
Дәйексөзді қалай келтіруге болады
