Research of the influence of adhesive additives on the physical and chemical properties of road bitumens

Authors

  • R.Kh Salakhov Institute of Combustion Problems, Bogenbay Batyr Str., 172, Almaty, Kazakhstan; LLC «In. Prometheus», 20, Toretai str., Almaty, Kazakhstan
  • B.B. Teltaev JSC «KazdorNII», 2a, Nurpeisova str., Almaty, Kazakhstan
  • A.O. Elshibaev JSC «KazdorNII», 2a, Nurpeisova str., Almaty, Kazakhstan
  • A.U. Nugmanova JSC «KazdorNII», 2a, Nurpeisova str., Almaty, Kazakhstan
  • T.A. Ketegenov LLC «In. Prometheus», 20, Toretai str., Almaty, Kazakhstan
  • A.R. Kenzhegaliyeva LLC «In. Prometheus», 20, Toretai str., Almaty, Kazakhstan; al-Farabi Kazakh National University, 71, al-Farabi av., Almaty, Kazakhstan

DOI:

https://doi.org/10.18321/cpc552

Keywords:

bitumen, adhesive additives, ductility, penetration, viscosity, softening temperature, brittleness temperature, aging resistance

Abstract

The purpose of this study was to solve the following problems: to evaluate the effect of adhesive additives on the physical and chemical properties of bitumen. Carry out a comparative analysis of the bituminous binder without additives and with the use of adhesive additives. Suggest the optimal type and composition of adhesive additives. The article presents the results of a study of the physical and chemical parameters of bitumen using adhesive additives («Wetfix Be», Amdor-9, AlfaDob) and concentrations from 0,2 to 0,6%. Changes in penetration values at a temperature of 25 °C, bitumen viscosity at 0 °C, ring and ball softening temperature, Fraas brittleness temperature, bitumen tensile ability (ductility) were found. The resistance of bitumen to aging after heating was determined by changing the softening temperature, changing the mass (%), residual penetration at 25 °C (%), and changing the absolute values of the brittleness temperature. Based on the results of the research, conclusions were drawn on the selection of  surfactants that improve the physical and chemical properties of the bituminous binder. 

References

(1). Evdokimova NG (2015) Development of scientific and technological foundations for the production of modern bituminous materials as oil dispersed systems [Razrabotka nauchnotekhnologicheskih osnov proizvodstva sovremennyh bitumnyh materialov kak neftyanyh dispersnyh sistem]. Dissertation for the degree of Doctor of Engineering Sciences. Moscow,Russia. P.417. (in Russian)

(2). Grushko IM, Korolev IV, Borsch IM, Mishchenko GM (1991) Road building materials: a textbook for universities – 2nd ed., revised. and additional [Dorozhno-stroitel’nye materialy: uchebnik dlya vuzov – 2-e izd., pererab. i dop] Transport, Moscow, Russia. P.357. (in Russian)

(3). Hefer A, Little D (2005) Adhesion in bitumen–aggregate systems and quantification of the effects of water on the adhesive bond: Research Report ICAR / International center for aggregates research. Report 505-1 (2005). Texas transportation institute,USA.

(4). Rossi CO, Caputo P, Baldino N, Lupi FR, Miriello D, Angelico D (2016) International Journal of Adhesion and Adhesives 70:297–303. https://doi.org/10.1016/j.ijadhadh.2016.07.013

(5). Fischer HR, Dillingh EC, Hermse CGM (2013) Applied Surface Science 265:495–499. https://doi.org/10.1016/j.apsusc.2012.11.034

(6). Khudyakova TS, Rozental DA, Mashkova IA (1991) Adhesive properties of oil bitumen and ways to correct them: a thematic review [Adgezionnye svojstva neftyanyh bitumov i sposoby ih korrektirovki: tematicheskij obzor] CNIITEneftekhim, Moscow, Russia. (in Russian)

(7). Zimon AD (1983) What is adhesion [Chto takoe adgeziya.] Nauka, Moscow, Russia. (in Russian)

(8). Airey GD, Collop A, Zoorob SE, Elliott RC (2008) Construction and Building Materials 22(9):2015-2024. https://doi.org/10.1016/j.conbuildmat.2007.07.009

(9). Habal A, Singh D (2016) Construction and Building Materials 113:351-358. https://doi.org/10.1016/j.conbuildmat.2016.03.060

(10). Zhang J, Apeagyei AK, Airey GD, Grenfell JRA (2015) International Journal of Adhesion and Adhesives 62:45-54. https://doi.org/10.1016/j.ijadhadh.2015.06.012

(11). Horgnies M, Darque-Ceretti E, Fezai H (2011) International Journal of Adhesion and Adhesives 31(4):238-247. https://doi.org/10.1016/j.ijadhadh.2011.01.005

(12). Gao Y, Zhang Y, Gu F, Xu T, Wang H (2018) Construction and Building Materials 171:214-222. https://doi.org/10.1016/j.conbuildmat.2018.03.136

(13). Cui S, Blackman BRK, Kinloch AJ, Taylor AC (2014) International Journal of Adhesion and Adhesives 54:100-111. https://doi.org/10.1016/j.ijadhadh.2014.05.009

(14). Xie J, Wu S, Pang L, Lin J, Zhu Z (2012) Construction and Building Materials 30:340-346. https://doi.org/10.1016/j.conbuildmat.2011.11.022

(15). Zhang J, Airey GD, Grenfell J, Apeagyei AK, Barrett M (2016) International Journal of Adhesion and Adhesives 68:133-141. https://doi.org/10.1016/j.ijadhadh.2016.02.013

(16). Cardone F, Frigio F, Ferrotti G, Canestrari F (2015) Journal of Traffic and Transportation Engineering (English Edition) 2:6:373-381. https://doi.org/10.1016/j.jtte.2015.06.003

(17). Yu X (2015) Advances in Colloid and Interface Science 218:17-33. https://doi.org/10.1016/j.cis.2015.01.003

(18). Maidanova NV (2010) Modification of oil bitumen by natural asphaltites. dissertation for the candidate of technical sciences [Modifikaciya neftyanyh bitumov prirodnymi asfal’titami. dissertaciya na soiskanie kandidata tekhnicheskih nauk] SPb, Russia. (in Russian)

(19). Gureev AA, Chernysheva EA, Konovalova AA (2007) Oil bitumen production [Proizvodstvo neftyanyh bitumov] Oil and gas, Moscow, Russia. (in Russian)

Published

2022-09-12

How to Cite

Salakhov, R., Teltaev, B., Elshibaev, A., Nugmanova, A., Ketegenov, T., & Kenzhegaliyeva, A. (2022). Research of the influence of adhesive additives on the physical and chemical properties of road bitumens. Combustion and Plasma Chemistry, 20(3), 247–255. https://doi.org/10.18321/cpc552