Investigation of conditions for creation of hydrophobic coatings

Authors

  • M. Nazhipkyzy Institute of Combustion Problems, Almaty, Kazakhstan; Al-Farabi Kazakh National University, Almaty, Kazakhstan
  • G.O. Tureshоva Institute of Combustion Problems, Almaty, Kazakhstan
  • A.В. Turganbay Institute of Combustion Problems, Almaty, Kazakhstan
  • A. Nurgain Institute of Combustion Problems, Almaty, Kazakhstan; Al-Farabi Kazakh National University, Almaty, Kazakhstan
  • B.T. Lesbayev Institute of Combustion Problems, Almaty, Kazakhstan; Al-Farabi Kazakh National University, Almaty, Kazakhstan
  • T.S. Temirgaliyeva Institute of Combustion Problems, Almaty, Kazakhstan; Al-Farabi Kazakh National University, Almaty, Kazakhstan
  • A.T. Isanbekova Institute of Combustion Problems, Almaty, Kazakhstan
  • A. Kemelbekova Academy of Civil Aviation, Almaty, Kazakhstan; Satbayev University, Almaty, Kazakhstan

Keywords:

hydrophobic coating, silicone waste, hydrophobic powder

Abstract

As part of the planned work, work was carried out to create hydrophobic fillers and waterproofing construction materials based on the obtained carbon nanomaterials with superhydrophobic properties, such as water-repellent and self-cleaning surfaces, and anticorrosion paints. To achieve this goal, a hydrophobic silica powder, obtained by burning silicon waste, and a hydrophobic carbon black, which is formed during combustion of the propane-butane gas mixture, was applied to the surface of the metal and drywall, and the surface properties of the materials were investigated. Work was done on imparting waterproofing properties to putty using superhydrophobic carbon black as a filler. Studies have shown that the addition of soot increases the hydrophobic properties of the putty to a certain limit, the maximum wetting angle (above 150 °) was recorded at a concentration of soot equal to 8%.

References

(1). Boinovich L.B., Emelianenko A.M. Hydrophobic materials and coatings: principles of creation, properties and application / / Successes of chemistry. 77 (7) 619-638 (2008). https://doi.org/10.1070/RC2008v077n07ABEH003775

(2). Podnebesny A.P., Savelieva N.V., Boyko V.V., Solodky V.N. Novelty of the recycling and use of industrial waste in rubber compounds // Materials of the International Symposium on Rubber and Rubber. M. 3 655-659 (1994).

(3). L.B. Boinovich. Superhydrophobic coatings are a new class of polyfunctional materials. Bulletin of the Russian Academy of Sciences, 8 (1) 10-22 (2013). https://doi.org/10.1134/S1019331613010024

(4). Lesbayev B.T. Nazhipkyzy M. Solovyova M.G. Smagulova G.T. Turesheva G.O. Auyelkhankyzy M. Mashan T.T. Mansurov Z.A. Hydrophobic Sand on the Basis of Superhydrophobic Soot Synthesized in the Flame Journal of Materials Science and Chemical Engineering. 2 (3) 63-65 (2012). https://doi.org/10.4236/msce.2014.21011

(5). Starostin. Materials and methods of nanotechnology. M. BINOM. Laboratory of Knowledge, 112-113 (2008). https://doi.org/10.1016/S1077-9108(08)70602-9

(6). M. Nazhipkyzy, B.T. Lesbaev, Z.A. Mansurov, G.O.Turesheva, N. Kabdrakhmanova, T. Temirgaliyeva, A. Nazikhanov. Conditions for formation of hydrophobic sand. // Industry of Kazakhstan. 89 (2) 82-84 (2015).

Published

2018-12-10

How to Cite

Nazhipkyzy, M., Tureshоva G., Turganbay, A., Nurgain, A., Lesbayev, B., Temirgaliyeva, T., Isanbekova, A., & Kemelbekova, A. (2018). Investigation of conditions for creation of hydrophobic coatings. Combustion and Plasma Chemistry, 16(3-4), 147–152. Retrieved from https://cpc-journal.kz/index.php/cpcj/article/view/208